焊烟吸尘专用主环保设备在日常的使用中须得你们压制日常生活的挡拆，允许业务能力保持专用主环保设备大部分的进行。上文就养大家领悟下焊烟吸尘专用主环保设备日常生活挡拆的好多个关头。The application of welding smoke and dust removal equipment in Nissan requires us to carry out daily protection in order to ensure the normal operation of the equipment. Below, we will take you to understand several key daily protection measures for welding smoke and dust removal equipment.　　1、办好行政人员应熟习除尘设备器的人生的道理、可以、利用情况，并拿捏专业调剂和补缀手段。1. Management personnel should be familiar with the principle, performance, and operating conditions of dust collectors, and master adjustment and repair methods.　　2、定期法测生产工艺技术参数，如烟道气量、温暖、氨水浓度等，问世很，应寻找理由并进行预防。2. Regularly measure process parameters such as smoke volume, temperature, concentration, etc. If abnormalities are found, the cause should be identified and promptly addressed.　　3、减速机、输灰机诫等机诫活跃零件应按划界注油和换油，出现有不般问题应时时清除。3. Mechanical moving parts such as reducers and ash conveying equipment should be lubricated and replaced according to regulations. Any abnormal phenomena should be promptly eliminated.　　4、涡流输入脉冲电磁阀如形成范围，应时时地清除，如外接有溶物、含水，应压制结算，如膜片危害应时时 换。4. If the electromagnetic pulse valve malfunctions, it should be promptly eliminated. If there are impurities or moisture inside, it should be cleaned. If the diaphragm is damaged, it should be replaced in a timely manner.　　5、断电时，不立即切断拉伸氧气源，很在真空风机完课时， 向提高阀气门供货拉伸学习氛围，以保持提高阀处上线动态。5. When shutting down, there is no need to block the compressed air source, especially during fan operation, to supply compressed air to the lifting valve cylinder to ensure the opening status of the lifting valve.　　6、收尘器在通常主课时，排灰系统不可能扼制主课，他怕，灰斗内好快会积满粉尘浓度导至溢入袋室，驱使收尘器扼制主课。

6. When the dust collector is operating normally, the ash discharge equipment cannot stop working. Otherwise, the ash hopper will quickly accumulate dust and overflow into the bag room, forcing the dust collector to stop working.　　7、开启时，时先挂断缩水风气至储气罐，挂断调节电压，策动排灰装备，假说机制中另有另一个装备，时先策动龌龊装备。7. When starting up, the compressed air should be connected to the air storage tank, the control power should be turned on, and the ash discharge equipment should be started. If there are other equipment in the system, the downstream equipment should be started first.　　8、储气罐、供气三联件中的灰色收入份离器应定期排出多次，二路灰色收入份离器应每过3～6月洗濯多次，油雾器应常常检查报告存油环境，雷达回波图打气。8. The oil-water separator in the gas storage tank and gas source triple unit should be discharged once per shift, and the oil-water separator should be cleaned every 3-6 months. The oil mist collector should regularly check the oil storage status and add oil in a timely manner.　　9、广泛操作如期式清灰远程操作柜，应如期测定法清灰周期怎么算并非是高精度，也不应抵制调济。广泛操作定阻式脉冲信号远程操作仪，应如期捡查工作压力旋转开关的学习方法方式，测压口并非是梗塞，并抵制清理。9. When using a timed ash cleaning control cabinet, the accuracy of the ash cleaning cycle should be regularly measured, otherwise adjustments should be made. When using a fixed resistance pulse controller, it is necessary to regularly check the operation status of the pressure switch, check if the pressure measuring port is blocked, and clean it.　　10、宕机时，在方法装修标准抑制是，应始终如一吸尘器和换气扇机继续作业这段是，以吸尘机械设备内的潮气和烟尘， 着重的是，在吸尘器抑制作业时， 频繁对吸尘器抑制清灰(要用人工清灰)，将吸尘滤布上的烟尘撤除，以访生霉气决定而糊塑料袋。10. When shutting down, after the process system stops, the dust collector and exhaust fan should be kept operating continuously for a period of time to remove moisture and dust from the dust removal equipment. It is important to repeatedly clean the dust collector (manual cleaning can be used) when the dust collector stops working, remove the dust from the dust filter bag, and prevent the bag from being affected by moisture and sticking.

以上便是有关：多工位焊烟除尘设备 的先容，想领会更多的内容请点击：//www.hbsgqt.com 咱们将会经心全意为您供给满分办事，接待您的来电！

The above is an introduction to multi station welding smoke and dust removal equipment. To learn more, please click: //www.hbsgqt.com We will wholeheartedly provide you with full score service. Welcome to call us!

上一篇：主动式抛丸机的任务道理
下一篇：VOCs废气处置设备的利用寿命