拒绝喷粉出厂线包容情况面保研生使用，轻重料区预定调动区。如果根据轴类的出厂需匹配出厂线加工制作工艺 传送速度1.5—6.0m/min，出厂线调节传送速度0.5-6.0m/min，直流变频变频调速放肆。吊式保研生机运行业务需稳定，无匍匐前进或卡死画面，动力装置须使用过载保护拒绝保护零件工、重锤式张紧零件工、输送链轨道、拒绝加油工作零件工，张紧零件工上拥有位移程度保护按钮面板开关，全程各关头身体部位均拥有悬链急停按钮面板开关，动力设无机物械、电力两重安静保护，拒绝喷粉线应设接油接灰及拒绝洁净并用接灰盘药理作用等，双动力搜集拒绝找补误差智力判别药理作用。

The automatic powder spraying production line adopts a horizontal conveying layout, with a reserved turnover area for loading and unloading. According to the production needs of the workpiece, the production line is paired with a process speed of 1.5-6.0m/min, an adjustable speed of 0.5-6.0m/min, and variable frequency speed control. The suspension conveyor needs to operate smoothly without crawling or jamming. The driving mechanism must be equipped with overload automatic protection device, heavy hammer tensioning device, and chain track automatic refueling device. The tensioning device is equipped with displacement limit protection switch, and all key parts of the entire line are equipped with suspension chain emergency stop switches. The drive is equipped with mechanical and electrical dual safety protection. The automatic powder spraying line should be equipped with functions such as oil and ash connection and automatic cleaning of ash tray. The dual drive synchronous automatic error correction intelligent recognition function is also required.

积极喷纳米粉保障系统认同纯色粉末状原材料对爬架零核心部件停下安稳静电粉末喷涂工艺，总纳米纳米涂层板材厚度60-80μm，部件各表皮面通常看上去无漏涂场景，纳米纳米涂层平均的紧密有灯光，附努力触达2级，表皮面通常看上去对抗强度≧3H，硬块画素描没干裂，表皮面通常看上去无变黄、起泡或零落缺陷： ；认同2套积极喷枪保障系统对部件静电粉末喷涂工艺，积极来去机升降变频器调节器，主要里程按部件装置，积极喷枪保障系统积极备感有节制，喷枪零丁可控硅调光。

The automatic powder spraying system uses monochromatic powder to comprehensively spray the climbing frame components, with a total coating thickness of 60-80 μ m. There are no missed coatings on the surfaces of the workpiece, and the coating is uniform, dense, and glossy. The adhesion reaches level 2, and the surface hardness is ≥ 3H. Hard objects will not peel when scratched, and there are no yellowing, bubbling, or peeling defects on the surface; Two sets of automatic spray gun systems are used to spray the workpiece. The automatic reciprocating machine has adjustable frequency conversion for lifting and lowering, and the maximum stroke is set according to the workpiece. The automatic spray gun system automatically senses and controls the spray gun separately.

喷粉工厂的每个个静电喷涂室内装修安装二个也是植物自动补喷治具，用以补喷。也是植物补喷位和主動主喷位须安装侧板决裂，并配照明设备工作体系，预定面积以期刚开始机诫人替代也是植物自动补漆创新发展。也是植物补喷位和主動主喷位必备条件供粉工作体系，来完成主動补粉，也是植物只用要移到设定住所。

Each spraying room in the powder spraying workshop is equipped with 2 manual spraying stations for spraying. The manual repainting position and the automatic main repainting position must be equipped with side panel isolation and lighting systems, with reserved space for robots to replace manual repainting in the future. The manual spraying position and the automatic main spraying position are equipped with a powder supply system to achieve automatic powder replenishment, and the manual only needs to be placed in the designated place.

静电感应喷涂线使用大飓风纯色管理体系，2.0mm的冷刚板做飓风男友分手器的基座，需要有二次进行过滤（配防静电胶皮感应、附膜滤心），配隔爆型高压排高压风机，高压排高压风机知名国际品牌post请求正南高压排高压风机或划一级上文知名国际品牌。照明为隔爆灯，喷女房东體资源使用PP三文治板建成，断决房前面用50mm的岩棉板，顶上用的是50mm的玻镁板。

The spraying line adopts a large cyclone monochrome system, with a 2.0mm cold steel plate as the main body of the cyclone separator. It needs to have a secondary filtration (equipped with anti-static and attached film filter elements) and an explosion-proof fan. The fan brand requires a Southern fan or a brand of the same level or above. The lighting fixtures are explosion-proof, and the main material of the spray booth is made of PP sandwich panels. The side of the isolation room is made of 50mm rock wool board, and the top is made of 50mm glass magnesium board.

被动涂装完课恳求喷枪兼具高矮和纯体前后轮挪动功能主治，该品牌标志恳求为歪果金马/英国瓦格纳或划一级不低于该品牌标志。涂装生产加工需注意有防火风险管理体系、粉尘质量浓度质量浓度加测配备，粉房气体压力加测，加测均带设备报警信号。个人品德核定区是在喷粉后到干固炉时候需注意瓦解，在瓦解区凸显这个定置查抄办公工位，在走进干固炉时候可查出不恰当的品。

The automatic spraying operation requires the spray gun to have up and down as well as overall forward and backward movement functions, and the brand should be Swiss Jinma/German Wagner or a brand of the same level or above. The spraying workshop needs to have an explosion-proof system, dust concentration detection device, powder room pressure difference detection, and all detection devices are equipped with equipment alarms. The quality confirmation area needs to be closed between the powder spraying and the curing furnace. A visual inspection station should be added to the closed area to detect defective products before entering the curing furnace.

上一篇：主动喷粉线有哪些主动喷粉设备的合作上风
下一篇：车间焊烟除尘设备常识先容