一、物理人喷砂工艺51漫画 线气体阐述：在物理人喷砂工艺51漫画 线前进行程中会出现“三废”不一定可处理的，此中喷砂气体是“三废”的首选身体局部。物理人喷砂工艺51漫画 线气体产自溶解溶解剂的甲醛释放，三聚氰胺树脂有机溶剂是不会随面漆映照在喷油漆物外层，在喷油漆和应用前进行程将全数开释，涉及甲醛释放性三聚氰胺树脂物（VOCs），首选有效成分有苯、甲苯及二甲苯等苯系物及他非甲烷气体总烃等。喷油漆房和干透室挤兑气体中的VOCs含量很低，还是风速大，静化物的首选有效成分为芳芬烃、醇醚类及酯类三聚氰胺树脂物，之类物理人喷砂工艺51漫画 线会出现的VOCs气体什么预防？对于此事我方接纳孩子沸石转轮溶解溶解+催化剂的作用变暗。

　　1、 Overview of exhaust gas from robot painting line: It is inevitable to generate "three wastes" during the process of robot painting line, among which spraying exhaust gas is the main part of the "three wastes". The exhaust gas from the robot painting line comes from the volatilization of diluents, and organic solvents will not adhere to the surface of the painted material with the paint. They will be completely released during the painting and curing process, forming volatile organic compounds (VOCs), mainly composed of benzene, toluene, xylene and other non methane hydrocarbons. The concentration of VOCs in the exhaust gas emitted from the spray booth and drying room is very low, but the air volume is high. The main components of pollutants are aromatic hydrocarbons, alcohol ethers, and ester organic compounds. How to treat the VOCs exhaust gas generated by this robot painting line? Our Kunshan Xinlan Environmental Protection adopts zeolite wheel concentration and catalytic combustion for this.

　　二、物理性人喷涂工艺线气体预防工作计划：物理性人喷涂工艺线VOC气体所经过程中 生产的风机保送生至转轮后，被转轮上的沸石物理离心分离，从风气平分割好了。在解物理离心分离中南部，所物理离心分离的VOC用同吃有大有小的热风气（约180至250℃）吹扫，从沸石上脱附来，此刻VOC氨水酸度被扑灭5至30倍。扑灭后气体进到崔化熄火（CO)：气体中VOCs被扑灭，支配混热器提供约100℃的小功率上火流来暂停反吹风脱附。脱附好了的高氨水酸度，小功率扑灭气体送货到崔化熄火机 内崔化熄火两极分化成CO2和H2O，熄火受热中水回用，节流和动力。　　2、 Robot painting line exhaust gas treatment plan: The VOC exhaust gas from the robot painting line is transported to the impeller by a fan, and then adsorbed by the zeolite on the impeller, separated from the air. In the desorption zone, the adsorbed VOCs are blown with a small amount of hot air (about 180 to 250 ℃) to desorb from the zeolite, and the VOC concentration is concentrated by 5 to 30 times. After concentration, the exhaust gas enters catalytic combustion (CO): VOCs in the exhaust gas are concentrated, and a small air flow of about 100 ℃ is provided by a mixer for back blowing desorption. The high concentration and low air volume concentrated exhaust gas desorbed is sent to the catalytic combustion equipment for catalytic combustion and decomposition into CO2 and H2O, which release heat for reuse and save energy.　　三、机人喷漆工艺线烟粉尘外理装备自己的特色：　　3、 Characteristics of exhaust gas treatment equipment for robot painting line:　　1.CO崔化熄火机 容纳达标率轻金属钯，镀铂在蜂窝陶瓷厂家承载中作为崔化剂，纯利效率达95%-99%，生命长，可降解，气味手机流量大，压力降小。　　1. The CO catalytic combustion equipment uses high-quality palladium metal and platinum plated on a honeycomb ceramic carrier as a catalyst, with a pure profit efficiency of up to 95% -99%, long lifespan, renewability, high gas flow rate, and low resistance.　　2.沉静具体的机制的机制齐全：消防设施喷淋头、泄压孔、超温报案等掩体具体的机制的机制。　　2. Complete safety facilities: protective facilities such as fire sprinklers, pressure relief holes, and over temperature alarms.　　3.耗电量：点火15-34分钟的时间全热效率加熱，主线任务时只耗损高压风机热效率便可。当51漫画废气有机废气浓度低时，相互间歇式拟补加熱。　　3. Power consumption: Preheat for 15-35 minutes for full power heating, and only consume fan power during operation. When the concentration of exhaust gas is low, automatic intermittent compensation heating is used.　　4.余热操控：余热可去往琐碎条件停机琐碎，减缩原琐碎条件的工率耗损。　　4. Waste heat utilization: Waste heat can be returned to the drying path for drying, reducing the power consumption of the original drying path.

　　本文由 机械人涂装线  友谊贡献.更多有关的常识请点击 //www.hbsgqt.com    朴拙的立场.为您供给为周全的办事.更多有关的常识咱们将会连续向大师贡献.敬请等候.

　　This article is a friendly contribution from the robot painting line. For more related knowledge, please click //www.hbsgqt.com Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned

上一篇：机械人主动喷粉线：喷粉主动出产线 | 完成一站式黑科技智能化出产
下一篇：焊烟除尘设备：焊接、切割车间烟尘满盈怎样办？