厂区吸尘后的杀菌消毒方法核心包括有以下那些：　　The disinfection methods for workshop dust removal mainly include the following:　　红外光谱光线酒精杀菌消毒剂法：红外光谱光线酒精杀菌消毒剂首选操作红外光谱光线主波长为136-390nm的红外光谱光线灯暂停星光照耀，此中253.7nm的除臭力最吊。红外光谱光线所经过程中撕碎微菌物的DNA分布来走到除臭梦想。其自己的缺点是操作简化、赚了钱较低，但不正确谬误是红外光谱光线刺穿力衰，合适于外形酒精杀菌消毒剂，且除臭数据受灯管时间和现状环境湿度反应。　　Ultraviolet disinfection method: Ultraviolet disinfection mainly uses ultraviolet lamps with wavelengths of 136-390nm for irradiation, among which 253.7nm has the strongest bactericidal power. Ultraviolet radiation achieves sterilization by disrupting the DNA structure of microorganisms. Its advantages are simple operation and low cost, but the disadvantage is weak UV penetration, suitable for surface disinfection, and the sterilization effect is affected by the lamp life and environmental humidity.　　海洋生物学清洗法：使用海洋生物学清洗剂如过钝化氢、过氧乙酸、二钝化氯等，这一些清洗剂经途步骤钝化度化粉碎性微海洋生物规划。海洋生物学清洗剂的忧点是杀菌消毒的能力强，对芽孢等有非常好的去除最后，但就可以或者是对设施设备和环境确立冲刷和过滤。　　Chemical disinfection method: using chemical disinfectants such as hydrogen peroxide, peracetic acid, chlorine dioxide, etc., which destroy microbial structure through oxidation. The advantage of chemical disinfectants is their strong bactericidal ability and good killing effect on spores, but they may cause corrosion and pollution to equipment and the environment.

　　超高温高电压过滤除菌法：将的东西复制到高电压液体过滤除菌器中，它是经过了时候负压调温操控是处于饱和状态水液体清杀微海洋生物。这种方试简化且液体能吸收到较深掩藏处，但应该即便对某一尤其是的东西转变成毁掉。　　High temperature and high pressure disinfection method: Place items in a high-pressure steam sterilizer, and use saturated steam to kill microorganisms by applying pressure and heating. This method is simple and steam can penetrate into deeper concealed areas, but it may cause damage to certain special items.　　老化清洁进行进行消毒法：老化在普通自然压下易两极分化为氧气瓶和拥有强脱色的性的氧共价键，对菌有与生俱来的脱色的感召。老化清洁进行进行消毒好用于较少区域，清洁进行进行消毒后不就会存留，但高氧浓度老化对人体肌肉无害物质，且对设施设备和修筑材料有破坏性。　　Ozone disinfection method: Ozone is easily decomposed into oxygen and oxygen atoms with strong oxidizing properties at room temperature and pressure, and has a strong oxidizing effect on bacteria. Ozone disinfection is suitable for larger spaces, and there will be no residue after disinfection. However, high concentrations of ozone are harmful to human health and corrosive to equipment and building materials.　　过虑法：调控某孔径、规格和文件的过虑设备对团队氛围停下过虑，删去疾病、积尘等处理应急物资。过虑模式能否即使主体剩余进行消毒脚踝调控，狠抓成品库第三方的干净彻底实际情况。　　Filtering method: Using specific diameter, density, and material filtering equipment to filter the air and remove pollutants such as bacteria and dust. The filtration system can be used in conjunction with other disinfection methods to ensure a clean environment inside the workshop.　　却别消毒剂习惯的优严重错误谬误及共用应用场景：　　Advantages, disadvantages, and applicable scenarios of different disinfection methods:　　红外光谱线杀菌酒精消毒：调控详细、挣到低，但阻隔力衰，同用于长相杀菌酒精消毒。　　UV disinfection: simple operation, low cost, but weak penetration, suitable for surface disinfection.　　无机化学消毒剂：杀菌的效果强，但对的设备和的情况有腐蚀性和油烟净化不安全。　　Chemical disinfection: Strong sterilization ability, but corrosive and polluting risks to equipment and environment.　　环境温度直流高压清洗：杀菌的的结果好，但能否而你受损某一装备。　　High temperature and high pressure disinfection: The sterilization effect is good, but it may damage certain items.　　活性氧灭菌：灭菌投资规模广，无杂质，但对人体肌肉无毒性，且对机器设备和整修姿料有侵袭性。　　Ozone disinfection: With a wide range of disinfection and no residue, it is harmful to human health and corrosive to equipment and building materials.　　过滤程序法：共用于气息净化水，不错或者与另一个清洁消毒习惯联系调控。　　Filtering method: suitable for air purification and can be combined with other disinfection methods.　　选用适合使用的紫外线灯消毒玩法时候需要要斟酌的身分：　　Factors to consider when choosing an appropriate disinfection method:　　微生态学款式和清洁级别：安装車间的微生态学款式和清洁级别辨别比较适合的杀菌除臭剂和途径。　　Microbial species and pollution level: Select appropriate disinfectants and methods based on the microbial species and pollution level in the workshop.　　设配和原因发生的接受力力：斟酌设配和原因发生的接受力力，以防调控能够或者转变成浸蚀或危害的行为。　　Tolerance of equipment and environment: Consider the tolerance of equipment and environment, and avoid using methods that may cause corrosion or damage.　　操作简练性和挣到生态整体：取舍操作简练、挣到生态整体高的具体方法，加强组织领导男人持久操作的能行性。　　Ease of operation and cost-effectiveness: Choose methods that are easy to operate and cost-effective to ensure long-term feasibility.　　所经进程网络综合斟酌这样的身分，行或者是分辨最恰当工厂除尘器后的杀菌的方式，加强组织领导工厂的干干净净和静谧。　　By considering these factors comprehensively, the most suitable disinfection method for workshop dust removal can be selected to ensure the cleanliness and safety of the workshop.

　　本文由车间全体除尘设备供给赞助，更多的相干内容请点击：//www.hbsgqt.com但愿本文可以或许为您带来赞助，感激您的浏览！

　　This article is assisted by the overall dust removal equipment in the workshop. For more related content, please click: //www.hbsgqt.com I hope this article can be helpful to you. Thank you for reading!

上一篇：主动喷粉线：主动喷粉怎样调能力到达想要的结果
下一篇：车间全体除尘设备：差别设备对照的优错误谬误