电泳线中的导电程序重中之重有在铝件（被喷涂工艺的原料）与电泳槽中的电解设备液中。电泳线是操作电磁场度化下导电激光束在有机溶剂中专向挪动的理由，停止工作金属材质相貌处治和喷涂工艺等操作的设备。一下是电泳线导电的详解阐发：　　The conductive process in the electrophoresis line mainly occurs between the workpiece (coated object) and the electrolyte in the electrophoresis tank. Electrophoretic line is a device that utilizes the principle of charged particles moving directionally in a medium under the action of an electric field to perform metal surface treatment and coating operations. The following is a specific analysis of the conductivity of electrophoresis lines:　　一、电泳线的执政之基每日任务启示　　1、 The basic working principle of electrophoresis line　　电泳喷漆的根本大道理可以即使即使举例综合评估为：在交流电静电场的度化下，带正正电荷量或负正电荷量的橡胶胶体部分水物体束（如真石漆中的硅橡胶和颜色水物体束）向没有响应的电极片（金属电极或阳极）挪动，并堆积，在底材表面定义涂膜。具体而言，若真石漆水物体束带负电，钢件看作阳极，则通称阳极电泳；反过来，若真石漆水物体束带正电，钢件看作金属电极，则通称金属电极电泳。

　　The basic principle of electrophoretic coating can be summarized as follows: under the action of a direct current electric field, positively or negatively charged colloidal particles (such as resin and pigment particles in coatings) move towards the corresponding electrode (cathode or anode) and deposit on the substrate surface to form a coating film. Specifically, if the coating particles are negatively charged and the workpiece serves as the anode, it is called anodic electrophoresis; On the contrary, if the paint particles are positively charged and the workpiece acts as the cathode, it is called cathodic electrophoresis.

　　二、电泳线的导电进度　　2、 The conductive process of electrophoresis lines　　铸件筹划：铸件在加入电泳槽事先，凡许要退出预代理，如除油、防锈处理、酸洗等，以思想进步涂膜的附负荷率。　　Workpiece preparation: Before entering the electrophoresis tank, the workpiece usually needs to be pre treated, such as degreasing, rust removal, phosphating, etc., to improve the adhesion of the coating.　　电泳槽与电解设备抛光法设备液：电泳槽中密布了电解设备抛光法设备液，该电解设备抛光法设备液由漆与水蒸气生理盐水按势必标准沉淀后造成。电解设备抛光法设备液中的漆粒子束拥有正电荷，可只不过只不过在电场线中定向委培挪动。　　Electrophoresis tank and electrolyte: The electrophoresis tank is filled with electrolyte, which is formed by diluting paint and distilled water in a certain proportion. The coating particles in the electrolyte carry charges and can move directionally in an electric field.　　电磁场强度组建：当零件渗入电泳槽并水淹在电解法液中时，沿途程序电泳供电公司标准体系对零件和电泳槽的探针进行通电，以此在零件与探针相互间组建电磁场强度。　　Electric field establishment: When the workpiece enters the electrophoresis tank and is immersed in the electrolyte, the electrophoresis power supply system is used to energize the workpiece and the electrodes of the electrophoresis tank, thereby establishing an electric field between the workpiece and the electrodes.　　导电连接物体挪动：在电场线的度化下，导电连接的漆料物体起头定向委培挪动。对阴离子电泳，带负电的漆料物体向部件（阴离子）挪动；对阳极电泳，带正电的漆料物体向部件（阳极）挪动。　　Charged particle movement: Under the action of an electric field, charged paint particles begin to move in a directional manner. For cathodic electrophoresis, negatively charged coating particles move towards the workpiece (cathode); For anodic electrophoresis, positively charged coating particles move towards the workpiece (anode).　　材料积聚：材料激光束在交变电场力的感召下，不是向零件外型积聚，开始形成平均值的涂膜。这样守护进程被称为电积聚。　　Coating deposition: Coating particles continuously deposit onto the surface of the workpiece under the action of electric field force, gradually forming a uniform coating film. This process is called electrodeposition.　　电渗作用：在电磁场作用下，涂膜间接的的水分从涂膜中渗分析出来，移向槽液，使涂膜脱水现象，最终得以看上去六倍低密度和耐侵蚀作用。　　Electroosmosis: Under the action of an electric field, the water inside the coating is dialyzed out and moved towards the tank solution, causing the coating to dehydrate and become denser and more corrosion-resistant.　　三、电泳线的导电的特色　　3、 The conductive characteristics of electrophoresis lines　　磁场标为的可调：途经守护进程调济电泳配电体系建设的交流电电压和交流电，能其实其实规范磁场的标为的和抗压强度，然后规范建筑涂料激光束的挪动传输率和经过。　　Controllable direction of electric field: By adjusting the voltage and current of the electrophoresis power supply system, the direction and intensity of the electric field can be controlled, thereby controlling the movement speed and path of the coating particles.　　涂料追溯力高：电泳涂料可能或或成功完成主动地化出厂，涂料传输率快，且涂膜一般、附效率强。　　High coating efficiency: Electrophoretic coating can achieve automated production, fast coating speed, uniform coating, and strong adhesion.　　绿色建筑环境保护：电泳涂料过程中，电解法液要即使即使生死轮回使用，严控了水资本管理的华侈。同样，电泳涂料形成的废渣、废水等净化水物较少，适宜环境保护提起。　　Energy saving and environmental protection: During the electrophoretic coating process, the electrolyte can be recycled, reducing the waste of water resources. At the same time, the wastewater, exhaust gas and other pollutants generated by electrophoretic coating are relatively small, which meets environmental protection requirements.　　结合以上说明，电泳线中的导电阶段是所经阶段磁场影响使导电连接漆微粒定向生挪动并沉积在铝件外观组成涂膜的阶段。一个阶段必须电泳供气风险管理体系市场机制磁场、电解法液市场机制导电连接微粒和铝件充当电极材料陪同表明。　　In summary, the conductive process in electrophoresis lines is the process of directing charged coating particles to move and deposit on the surface of the workpiece to form a coating film through the action of an electric field. This process requires an electrophoresis power supply system to provide an electric field, an electrolyte to provide charged particles, and a workpiece as an electrode to participate in the reaction.

　　本文由 电泳线 友谊贡献.更多有关的常识请点击  //www.hbsgqt.com   朴拙的立场.为您供给为周全的办事.更多有关的常识咱们将会连续向大师贡献.敬请等候.

　　This article is a friendly contribution from the electrophoresis line For more related knowledge, please click //www.hbsgqt.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

上一篇：涂装流水线在哪些利用处景比拟好？
下一篇：喷塑出产线的烤箱任务道理