机械厂性装备制造人防腐蚀涂料线又被称为机械厂性装备制造人防腐蚀涂料线。可可以分为人工手动开启机组机械厂性装备制造人防腐蚀涂料线和链接主动性机械厂性装备制造人防腐蚀涂料线, 比较适合多規格电路板的软件制作工序。一侧、两方软件交流变频有级变速汽车电器、电子技术变速汽车电器等；运行体例可分被迫和轻松节。

　　Robot coating line, also known as robot coating line. It can be divided into manual robot coating line and chain automatic robot coating line, suitable for the plug-in process of multi specification circuit boards. Unilateral and bilateral plug-in variable frequency stepless speed control motors, electronic speed control motors, etc; The operation mode can be divided into forced and free sections.

　　主产线机制化人防腐蚀涂料专用设施设备线的组合公式及快速软件设置专用设施设备货架可恣肆新技术革命，每台机长为3M，2.4M几种可于时新技术革命，组合及快速软件设置专用设施设备货架，机制化人防腐蚀涂料专用设施设备线频率能用的 变速器转钮调济想要保研频率，厚度可与线路板厚度能够高速度，后盖由铝锰钢组合，操作摇杆可等闲调济插件操作厚度30-320mm，基钢板与机制化人防腐蚀涂料专用设施设备线作战面只需2.5mm。　　The combination and configuration of the robot coating line on the production line can be changed arbitrarily. Each machine has a length of 3M and 2.4M, which can be changed at any time. The composition and configuration of the robot coating line can be adjusted with a variable speed knob to adjust the required conveying speed. The width can be adjusted at any time with the width of the circuit board. The body is made of aluminum alloy, and the plug-in width can be easily adjusted by operating the joystick to 30-320mm. The contact surface between the substrate and the robot coating line is only 2.5mm.　　生成物代表性:　　Product features:　　1，手推机诫人涂漆线辨别是非铝形材导轨看作保研物质，于是该线体摩擦力小,无乐音,也不须加任何的人细腻油,对所保研的设计印刷板无任何的人环保问题。　　1. The painting line of the hand pushed robot uses aluminum profile guide rails as the conveying medium, so the friction force of the line body is small, there is no noise, and no lubricating oil is needed, which does not pollute the printed circuit board being transported.　　2，线体由是多少个原则型三米机构产生。每段个机构为完全自力的广大干部，级任务髙度720~760可调式，灯饰敞开心扉30W条管荧光灯（灯管为philip）。　　2. The line body is composed of several standard 2-meter units. Each unit is a relatively independent whole, with an adjustable working height of 720-760. The lighting adopts 30W straight tube fluorescent lamps (with Philips tubes).　　3，线体结构总体目标雅观风韵，机架认识自己橡胶模具生产加工，类别性好，梯形管、钢板使用美丽规程姿料，认识自己喷塑流程。整套线努力特征古代中国手机厂主动地化生产加工优点。　　3. The design of the wire structure is beautiful and generous, and the frame is produced using molds with good consistency. High quality standard materials are used for rectangular tubes and plates, and spray molding technology is adopted. The entire line fully embodies the characteristics of modern electronic factory automation production.　　4，机械性人喷漆线联合的基板打印输出机后能同本企业产于的各种类型号爪式波峰悍取货联机通过。于是包括一道拒绝化喷漆悍接产于线体系中。　　4. The robot coating line, in conjunction with the substrate input machine, can be used online with various models of claw wave soldering machines produced by our company. Thus forming an automated painting and welding production line system.　　·技术叁数　　·Technical parameters　　1.机 架：认同40×40×1.5mm矩H型钢管组焊别墅建造，支脚配可调节为脚杯。　　1. Rack: Made of 40 × 40 × 1.5mm rectangular steel pipes welded together, with adjustable foot cups for support legs.　　2.台 板：使用δ=15mm的木电夹板，面铺湖兰色消防板，T型胶条边，宽B=1200mm。　　2. Bedboard: Made of wood splints with a width of δ=15mm, covered with a lake blue fireproof board, T-shaped rubber strips wrapped around the edges, with a width of B=1200mm.　　3.导 轨：采纳手推机械厂人防腐蚀涂料线共公铝导轨，导轨行间距0-350mm可以调节，双向合理安排。　　3. Guide rail: It adopts a hand pushed robot coating line dedicated aluminum slide rail, with adjustable guide rail spacing of 0-350mm and arranged on both sides.　　4.照 明：灯架使用40×40×1.5mm矩型管构造，配40W太阳光之下进行灯管，多边准备。　　4. Lighting: The lamp holder is made of 40 × 40 × 1.5mm rectangular tubes, equipped with 40W fluorescent tubes, arranged on both sides.　　5.加工过程卡：在灯架中间商设一同儿加工过程关照卡架，容忍H型铝导轨打造，每卡位规划一同300×400×1.5mm通明硅化物钢化平面镜。　　5. Process card: Install a process guidance card holder in the middle of the lamp frame, made of H-shaped aluminum guide rails, and arrange a transparent organic glass plate of 300 × 400 × 1.5mm at each workstation.　　6.部件盒挂条：在灯架下买卖双方设四公里部件盒挂条，采用30×30mm的矩形管别墅建造。　　6. Component box hanging strips: Two component box hanging strips are installed on both sides under the lamp frame, made of 30 × 30mm angle steel.　　7.机器特色搭配：主机看起来采纳电子设备大红色喷塑或消费者自定特色搭配　　7. Body color: The surface of the body is made of computer white spray paint or a color customized by the customer

　　本文由  机械人涂装线   友谊贡献.更多有关的常识请点击 //www.hbsgqt.com朴拙的立场.为您供给为周全的办事.更多有关的常识咱们将会连续向大师贡献.敬请等候.

　　This article is a friendly contribution from the robot painting line. For more related knowledge, please click //www.hbsgqt.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned

上一篇：主动式抛丸机在平常任务中若何利用？
下一篇：多工位焊接烟尘污染体系的利用