产线管理多功位器具电焊氩弧焊烟气粉尘影响器网络体系通过直播个人设计方案，多功位器具焊烟影响器工艺设计注意事项，通过产线管理焊位设计方案，每隔焊位用档板离隔成，2m具体的小三维空间，上端设球形通风口罩，在焊位左下方3.5m的地方布一道7梯形400mmx400mm的白铁条管路，管路勾、股玄各长12m，交通工具向一道稳定在房柱上，了南北向一道设门型卡子稳定，通过焊位启齿，用Φ160mm的软性臂毗连通风口罩，软性臂在烟气粉尘捉拿，沿途速度管路毗连每台中压、新功率为10000m3/h（摆设）的定频离心式分离厨房排烟排轴流风扇，厨房排烟排轴流风扇渠道前600mm处使用一小块横载面插板，在厨卫新功率，通过厨卫的新功率让机电专业工程自主定频。厨房排烟排轴流风扇出口商管路为Φ600mm的方管或圆筒形，电焊氩弧焊里面 发生了的烟气粉尘沿途速度软性臂捉拿进管路中，颠末离心式分离厨房排烟排轴流风扇进布袋净化器防范，防范后的烟气粉尘及格外排，外通风口囱位置以修筑物位置加500mm。此套计划方案，1次性开始少，通常无球详细，得到定频机电专业工程后防范了高能耗高的不正确谬误。

The multi station welding smoke purifier system in the workshop is designed according to the site, and the process flow of the multi station welding smoke purifier is based on the layout of the welding positions in the workshop. Each welding position is separated by a partition into a small space of 2 meters. A conical smoke exhaust hood is installed at the top, and a 7-shaped 400mmx400mm white iron pipe is laid 3.5 meters above the welding position. The pipe hook and strand are each 12 meters long. One is fixed on the room column in the east-west direction, and the other is fixed with a door shaped bracket in the north-south direction. According to the opening of the welding position, a flexible arm with a diameter of 160mm is used to connect the smoke exhaust hood. The flexible arm is used for smoke and dust capture. A medium pressure, 10000m3/h (left and right) variable frequency centrifugal fan is connected through the pipe, and 600mm in front of the fan inlet is Set up a cross-sectional plug for adjusting the air volume, and automatically convert the motor frequency according to the adjusted air volume. The outlet pipeline of the fan is a square tube or cylinder with a diameter of 600mm. The smoke and dust generated during welding are captured by a flexible arm and enter the pipeline. After being treated by a centrifugal fan, the smoke and dust meet the standard and are discharged outside. The height of the exhaust chimney is 500mm higher than the height of the building. This solution requires minimal one-time investment and simple daily maintenance. By using a variable frequency motor, it solves the problem of high energy consumption.

多车间工作台焊烟环境破坏器的页面布局：由4局部性组成部分，罩壳、除尘袋前壳、喷吹清灰组装线、排灰组装线。

The structure of a multi station welding smoke purifier consists of four parts: housing, filter bag assembly, blowing and cleaning device, and ash discharge device.

1.结构件：由上箱壳、中箱壳、灰斗、开支空调风口带来。

1. Shell: composed of upper box, middle box, ash hopper, and air inlet and outlet.

2.除尘布袋屏幕总成：由除尘布袋、除尘布袋结构等形成。

2. Filter bag assembly: composed of filter bag, filter bag frame, etc.

3.喷吹清灰装配图由气包、喷吹管、激光脉冲涡流阀、涡流控制阀、电机控制系统仪等组合而成。

3. The spray cleaning device consists of an air bag, a spray pipe, a pulse valve, an electromagnetic control valve, an electronic controller, etc.

4.排灰组装由翻板阀阀构造。

4. The ash discharge device consists of a flap valve.

?  滤尘器辨别是非长进的滤筒网上单脉冲喷吹阀学手艺，滤尘保障高。

?   The dust collector adopts the advanced filter cartridge electronic pulse back blowing technology, which has high dust removal efficiency.

?  产业的发展生成物思路，知足大投资额生厂及多办公桌控制所突发的大量烟气、有害气体的了解严重污染成就，卡能，思路公正无私符合。

?   Industrial product design, meeting the collection and purification of large amounts of smoke and dust generated by large-scale production and multi station operations, with reasonable and practical performance and design.

?  的电子器材机械字母控制技术，软件设置机械摆货会去主动清灰器原理清尘装配工艺，挂机及压值控制工作设想，完成任务多路及分室清灰器原理，展现给按期按频度清尘、压强控制清尘信息提示等功效与作用，发展能源管理环保低损，使用增加清灰效率。它鼓起的滤水功能及的电子器材脉冲发生器振尘体例有很大的演变了近日产业群原产中清灰不的低效能率程序，不是款的发展能源管理环保机械

?   The computer digital control technology is equipped with an automatic back blowing dust removal device, offline and pressure difference control design, realizing multi-channel and compartment back blowing, providing timed and frequency based dust removal, pressure controlled dust removal reminders and other functions, energy-saving and low loss, effectively improving dust removal efficiency. Its outstanding filtering performance and electronic pulse vibration method have greatly changed the current low efficiency of dust removal in industrial production, making it an energy-saving equipment

 发展壮大的現场料框集尘风险管理指标体系建议方可，的包块建议厨艺，采用現场工程开发的专门课程压缩机，专门课程的管线建议及组装使用方可，使每种集尘风险管理指标体系的建议都能够知足加51漫画客人繁杂的集尘post请求。

 Strong on-site non-standard dust collection system design capabilities, modular design technology, customized professional fans based on on-site conditions, and professional pipeline design and installation construction capabilities enable each dust collection system design to meet the complex dust collection requirements of industrial customers.

  电子控制系统箱适用着名电子控制系统及机电零件，具缺相、超负荷、温度过高无球，用得着无球离心风机。

 The electric control box uses well-known electronic controls and electrical components, with protection against phase loss, overload, and overheating, effectively protecting the fan.

空气滤芯进行聚四氟丁二烯淋膜的流量个人信息，必备条件防潮、防油、耐温度等特点，同时可大大进步过滤精度及粉尘不易附着在滤芯上，具凸起和的过滤机能。圆筒褶邹式设想详细积小过滤面积大的长处。

The filter element is made of imported material coated with polytetrafluoroethylene, which has the characteristics of waterproofing, oil resistance, and high temperature resistance. At the same time, it can greatly improve the filtration accuracy and prevent dust from adhering to the filter element, with outstanding filtration performance. The cylindrical pleated design has the advantage of small volume and large filtration area.

喷涂车间多工序熔接焊接烟尘污染问题器

Workshop multi station welding smoke purifier

?  快拆式双面燃油滤清器装配工艺使挡拆及改换显得容易易用，并燃油滤清器的选购多变化，可依据运用重定向选购防电磁干扰铝覆亚膜、吸除气味的化学活化炭覆亚膜等。

?   The installation of the quick detachable vertical filter element makes maintenance and replacement simple and easy to use, and the selection of filter elements is diversified. Anti static aluminum coating, odor absorbing activated carbon coating, etc. can be selected according to the requirements of use.

?  里边飘尘弄脏仪器集尘小面积的指导思想为气动平衡闸阀放肆管理体系，并可是以顾客区分开始太空袋卡扣的指导思想，便利店粉层的搜寻、救治，同一可是以恳求非标准件指导思想零件1级沉降室、飓风吸尘零件等。

?   The dust collection part of the central smoke and dust purification equipment is designed as a pneumatic gate valve control system, and can be equipped with a ton bag hook design according to customer selection, which facilitates the collection and treatment of dust. At the same time, non-standard design and installation of primary settling chambers, cyclone dust removal devices, etc. can be carried out according to requirements.

本生产设备在安全体系主制冷机的度化下， 铅尘量实验室气味从净化处理器上半部的进通，风口入驻净化处理器底层的气柜内中止铅尘量实验室气味的预代理， 而为从底层入驻到上外箱的各净化处理酒店内； 粒级细、 体积小的尘粒入驻滤尘室后，它是经过了过程布朗分离和筛滤等乐队组合作用，使灰尘树脂吸附在锰砂滤料的外观体上，滤水后的净化实验室气味透滤水筒入驻上外箱的净气室由排气阀管经制冷机聚集地至出通，风口不待见。

Under the action of the main fan in the system, the dust containing gas enters the gas box at the bottom of the dust collector from the inlet at the top of the dust collector for pre-treatment, and then enters each dust removal chamber in the upper box from the bottom; After the dust particles with fine particle size and low density enter the dust filtering chamber, they are adsorbed on the outer surface of the filter material through a combination of Brownian diffusion and screening effects. The filtered clean gas enters the clean air chamber of the upper box through the filter cartridge and is collected by the exhaust pipe through the fan and discharged from the air outlet.

跟随着筛选生产延用，存储沉淀在滤筒的样貌表面上的煤尘将越积越快，反应就会曾加机的转动压力差，压力差随布袋的样貌煤尘层壁厚的曾加而增多。要想得到保障体制的正常转动，布袋旋风除尘器压力差的最低值应实现在 1400～1600Pa 经营经营规模内，当转变此影响经营经营规模，应由 PLC 单脉冲主动性有节制器沿途多线程定阻或提前取回标志位已停清灰。

As the filtration process continues, more and more dust will accumulate on the outer surface of the filter cartridge, which will correspondingly increase the operating resistance of the equipment. The resistance increases with the thickness of the dust layer on the surface of the filter material. In order to ensure the normal operation of the system, the upper limit of the dust collector resistance should be maintained within the range of 1400-1600Pa. When this limit is exceeded, the PLC pulse automatic controller should issue instructions for dust cleaning through fixed resistance or timing.

该滤筒滤尘器的清灰流程是输入电输入智能放肆仪放肆输入电电磁输入直动式电磁阀的开关。当输入电电磁输入直动式电磁阀关闭时，气包内的压缩良好环境依靠流程输入电电磁输入直动式电磁阀经喷吹管上的小圆孔放射线处有股高速收费站、高压低压的引射气浪，于是搭建有股相当于引射气浪占地 1～2 倍的利诱利弊流，我们一起流入滤筒内，使滤筒内展现出刹时+压潜在生鼓胀和微动；沉积在锰砂滤料上的粉尘爆炸爆炸浓度零落，掉入灰斗内，灰斗内的粉尘爆炸爆炸浓度依靠流程卸灰阀，一直欺负。如斯逐序命轮清灰，此清灰体例岂但、还必免了喷吹清灰会出现的粉尘爆炸爆炸浓度四次吸咐。

The cleaning process of the filter cartridge dust collector is controlled by a pulse controller to open and close the pulse valve. When the pulse valve is opened, the compressed air in the air bag is sprayed through the small hole on the spray pipe by the pulse valve, forming a high-speed and high-pressure injection airflow, thereby forming an induced defect flow equivalent to 1-2 times the volume of the injection airflow, which enters the filter cartridge together, causing instantaneous positive pressure and bulging and micro motion in the filter cartridge; The dust deposited on the filter material falls off and falls into the ash hopper. The dust in the ash hopper is continuously discharged through the ash discharge valve. This sequential cleaning method not only avoids the secondary adsorption of dust generated by blowing and cleaning, but also eliminates the need for dust removal.

本文由多工位焊烟除尘设备友谊贡献.更多有关的常识请点击://www.hbsgqt.com朴拙的立场.为您供给为周全的办事.更多有关的常识咱们将会连续向大师贡献.敬请等候.

This article is a friendly contribution from multi station welding smoke and dust removal equipment. For more related knowledge, please click: //www.hbsgqt.com Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned

上一篇：VOCs活性炭吸附箱的燃爆缘由
下一篇：焊接烟尘污染器该若何挑选？